Flooring and Tread Adhesive

Item No.: U189
U189 is a water-based eco-friendly adhesive that meets the GB 18583-2008 standard. It has super strong initial adhesion and final adhesion strength.
Description
Description
Introduction
U189 is a water-based eco-friendly adhesive that meets the GB 18583-2008 standard. It has super strong initial adhesion and final adhesion strength. It is specially used for pasting vinyl stair tread, and it is also suitable for various vinyl flooring.
Features
1. Sticks fast.
2. High strength and excellent grab.
3. Ready-mixed, easy to use.
4. Installation and clean-up is simple
5. Good residual tack.
6. Long working time, easy repositionin.
7. Low odor and low emission.
8. Environmentally friendlys.
Technical Data
1. Base: acrylic
2. Color: tan
3. Consistency: paste
4. Theoretical coating amount: about 80—85m2/vat
5. Waiting time: about 20 minutes (depending on temperature and humidity)
6. Available walking time: ≥24 hours
7. Transportation and storage temperature: 5 to 35°C (not frost resistant)
8. High temperature resistance: up to 50°C (can be used for heating floors)
9. Storage: 12 months at room temperature
10. Package: 5kgs
Usage
1. Make sure the base has no structural defects, with appropriate drawing strength, and the base layer is dry, clean and free of scum or pollution.
2. Absorbent base layer: No need to dilute, use A2 /A3 to spread glue on the surface of the base layer. According to the temperature and humidity of the construction site, it takes about 15 to 25 minutes to dry the glue (it has obvious stickiness and drawing feeling by hand) to applicate the stair tread, then use the cork press to flatten, and then use a rubber hammer to evenly hit the bonded the stair tread to achieve a better paste effect.
3. Non-absorbent base layer: No need to dilute, brush glue on both sides, use Al /A2 to spread the glue on the base layer and stair tread. After drying the glue(the finger is sticky and there is no drawing feeling), you can lay the stair tread, then use the cork press to flatten, and then use the rubber hammer to evenly hit the bonded stair tread to achieve a better bonding effect.
Application
Send your message to us
ver_code
pop_close
pop_main
Stay In The Know
Enter your email to hear from us about Product list, Latest Products and Customer application examples!